Skip to content

Range Repair in Beverly Hills, CA

Specialists in Sub-Zero, Viking, Wolf and Thermador appliances. Serving Beverly Hills and nearby cities.

  • Diagnosis before any repair
  • Options explained up front
  • Genuine OEM parts

We repair Sub-Zero, Viking, Wolf and Thermador appliances.

Independent service company. Not affiliated with or endorsed by Sub-Zero, Viking, Wolf or Thermador.

The short answer

We repair Viking, Wolf and Thermador ranges in Beverly Hills homes, including burners that won't light, ovens that run hot or cold, and failed igniters, fans and controls. A technician diagnoses the problem at your home and explains the repair before starting.

When a professional range stops behaving, most of the kitchen is out of action. We repair gas, dual-fuel and electric ranges in Beverly Hills homes across ZIP codes 90211 and 90212, driving about 10 miles from our base in Van Nuys. Most of our work starts with Sub-Zero refrigeration, and the ranges in those same kitchens are usually Viking, Wolf or Thermador. Our technicians work on those cooktops, ovens, broilers and griddles every week. We are an independent repair company, not affiliated with any brand. We come to find the actual fault and fix it, not to sell you a new range.

Range problems we fix in Beverly Hills homes

Professional-style ranges are built heavier than standard models, but they have more parts that can wear: multiple burner sizes, separate igniters, convection fans, infrared broilers and electronic oven controls. These are the calls we get most often:

  • Burners that click but won't light, or keep clicking after the flame is on
  • Weak, yellow or uneven flames, or a simmer burner that goes out on low
  • Oven that won't reach temperature, overshoots it, or heats unevenly from front to back
  • Convection fan that is noisy, slow or not turning
  • Infrared broiler or griddle that won't heat
  • Self-clean cycle that won't start, or a door that stays locked afterward
  • Control panel errors, unresponsive knobs, or a display that goes dark
  • Cracked or loose door glass, worn door gaskets, and hinges that no longer hold the door shut
Range Repair in a luxury home kitchen

Gas, dual-fuel and induction need different repairs

Many Beverly Hills kitchens have dual-fuel ranges, with gas burners on top and an electric oven below. A Wolf dual-fuel range is a common example. That setup means the cooktop and the oven fail in different ways. A burner problem usually comes down to igniters, spark modules, burner caps, orifices or valves. An oven problem points to bake and broil elements, temperature sensors, relays or the control board.

All-gas ranges, including many Viking and Thermador models, use gas oven igniters that weaken over time. A weak igniter often looks like an oven that takes forever to preheat or never lights. Thermador's sealed star-shaped burners and low-simmer settings, and the open burners on some Viking and Wolf models, each need their own approach to cleaning and adjustment. Induction and electric smoothtop units are a separate category, where we check power boards, coils and sensors. Knowing which type you have before we arrive helps us bring the right parts.

What happens during a range repair visit

The technician starts by asking what you've noticed: when the problem started, whether it's constant or occasional, and any error codes on the display. Then they test the range directly. That means checking igniter draw and spark, gas flow and flame pattern at each burner, element resistance, sensor readings, and actual oven temperature against the set point.

Once the cause is found, we explain what failed, what the repair involves, and whether the part is likely on the truck or needs to be ordered. You decide before any work begins. When the repair is done, we run the burners and oven through a full cycle to confirm everything works.

Tell us what your appliance is doing.

Before the technician arrives

If you smell gas, don't use the range. Turn the burner knobs off, avoid switching lights or appliances on or off, leave the house, and call your gas utility or 911 from outside. Range repair comes after the gas leak is handled.

For other problems, a few details save time: the model and serial number (usually on a tag behind the oven door, under a drip tray, or behind a lower kick panel), any error codes, and a short note on what the range does or doesn't do. Please clear the cooktop and let the oven cool completely before the visit.

Serving Beverly Hills and nearby communities

Beverly Hills is part of our regular service area in Los Angeles County, along with West Hollywood, Los Angeles, Culver City, Santa Monica and Burbank. Besides ranges, we service Sub-Zero refrigerators, freezers and wine storage, plus Viking, Wolf and Thermador cooking appliances. One visit can cover more than one appliance if you need it.

More services in Beverly Hills

Related

Modern kitchen with a built-in stainless refrigerator and a professional-style range

Book Range Repair in Beverly Hills

Specialists in Sub-Zero, Viking, Wolf and Thermador appliances. Serving Beverly Hills and nearby cities.

  • Diagnosis before any repair
  • Options explained up front
  • Genuine OEM parts

What to expect

How a visit goes

  1. Find the cause first

    We test the components involved, such as sensors, fans, igniters, valves, and control boards, and replace parts only after we understand why the appliance failed.

  2. Clear choices before work starts

    You'll hear what's wrong, what the repair involves, and whether another option makes more sense. Then you decide how to proceed.

  3. Respect for built-in installations

    Integrated refrigerators, wall ovens, and cooktops sit inside custom cabinetry and stone. We protect panels, trim, and surrounding finishes while we work.

FAQ

Common questions

Do you repair Sub-Zero ranges?

Sub-Zero makes refrigeration, not ranges. The ranges in Sub-Zero kitchens are usually Wolf, Viking or Thermador, and we repair all three. We also repair the Sub-Zero units in those kitchens.

Why do my burners keep clicking after they light?

Continuous clicking usually means moisture or food residue around the igniter, a misaligned burner cap, or a failing spark module or switch. We check each burner to find which one is the cause.

My oven takes much longer to preheat than it used to. What's wrong?

On gas ovens, a weakening igniter is the most common cause. On electric or dual-fuel ovens, check the bake element and temperature sensor. A technician can test both at your home.

Is it worth repairing an older professional range?

Often, yes. These ranges are built heavy, and most failures are replaceable parts like igniters, elements, sensors and valves. We give you the diagnosis so you can decide.

Do you work on induction and electric ranges too?

Yes. We service electric and induction ranges and cooktops in addition to gas and dual-fuel models.

Which Beverly Hills ZIP codes do you serve?

We serve homes in 90211 and 90212, as well as nearby West Hollywood, Los Angeles, Culver City, Santa Monica and Burbank.

Schedule a diagnosis

Tell us the brand, model, and what the appliance is doing. We'll set up a visit to find the cause and walk you through your repair options for Sub-Zero, Viking, Wolf, or Thermador equipment.

Call (419) 545-5614 Request Service